Tipper Truck Operator
2025-08-15T18:41:43+00:00
ZCCM Investments Holdings
https://cdn.greatzambiajobs.com/jsjobsdata/data/employer/comp_3458/logo/ZCCM%20Investments%20Holding%20Plc.jpg
https://www.zccm-ih.com.zm/
FULL_TIME
Zambia
Lusaka
10101
Zambia
Investment
Admin & Office
2025-08-19T17:00:00+00:00
Zambia
8
JOB PURPOSE
To assist the project Manager, carry out efficient continuous material haulage and management incident free throughout the project duration.
- Operate a Tipper truck and haul tonnes of materials to the destination site.
- Conduct daily pre-start checks, basic maintenance and report any mechanical issues on the equipment.
- Inspect equipment and supplies such as: tyres, lights, brakes, gas, oil, water and all fluids. Perform pre and post trip inspections and ensure any defects are reported and repaired before use.
- Adhere to workplace health, safety, and environment (HSE) standards and report hazards or incidents immediately.
- Ensure compliance with all safety regulations and operational procedures.
- Ensure that speed limits and road signs in place are observed to reduce the risk and all reasonable measures are implemented to avoid accidents.
- Accurately record hours worked and other information into the daily work sheet.
- Keeping the truck clean and in good working order.
- Ensuring that the machinery is not overloaded and comply with the load restrictions.
- Maintain high standards of conduct and comply with all relevant rules and requirements.
- Participate in workplace skills assessment and training required.
- Give feedback on constraints to supervisor/subordinates as and when necessary.
- Carry out any other activities as assigned by the Supervisor.
- Must be willing to work in shifts, including weekends if necessary.
Job Requirements
- Grade 12 Certificate
- Machine specific training Certificate/Licence
- Valid Operating Permit
- Familiarity with mining workplace safety protocols and procedures.
- Must possess knowledge on how to do the pre- start check on the machine and able to identify defects.
- Must be conversant with controls/parts and their functions on a machine.
- Must possess knowledge about machine shut down and emergency procedures
- Minimum of 2 years relevant work experience in a mining environment, open pit will be an added advantage.
Skills and competencies
- Strong attention to detail and safety-conscious mindset.
- Good communication skills.
- Physically fit to handle the demands of the job.
- Problem-solving skills and ability to make quick decisions.
- Good team player and able to coordinate work with minimum supervision.
Working Environment
Job holder is exposed to project site working environment in remote locations. Job Holder will be stationed at the Rufunsa mining project site or any assigned site
To assist the project Manager, carry out efficient continuous material haulage and management incident free throughout the project duration. Operate a Tipper truck and haul tonnes of materials to the destination site. Conduct daily pre-start checks, basic maintenance and report any mechanical issues on the equipment. Inspect equipment and supplies such as: tyres, lights, brakes, gas, oil, water and all fluids. Perform pre and post trip inspections and ensure any defects are reported and repaired before use. Adhere to workplace health, safety, and environment (HSE) standards and report hazards or incidents immediately. Ensure compliance with all safety regulations and operational procedures. Ensure that speed limits and road signs in place are observed to reduce the risk and all reasonable measures are implemented to avoid accidents. Accurately record hours worked and other information into the daily work sheet. Keeping the truck clean and in good working order. Ensuring that the machinery is not overloaded and comply with the load restrictions. Maintain high standards of conduct and comply with all relevant rules and requirements. Participate in workplace skills assessment and training required. Give feedback on constraints to supervisor/subordinates as and when necessary. Carry out any other activities as assigned by the Supervisor. Must be willing to work in shifts, including weekends if necessary.
Grade 12 Certificate Machine specific training Certificate/Licence Valid Operating Permit Familiarity with mining workplace safety protocols and procedures. Must possess knowledge on how to do the pre- start check on the machine and able to identify defects. Must be conversant with controls/parts and their functions on a machine. Must possess knowledge about machine shut down and emergency procedures Minimum of 2 years relevant work experience in a mining environment, open pit will be an added advantage.
JOB-689f7f676306a
Vacancy title:
Tipper Truck Operator
[Type: FULL_TIME, Industry: Investment, Category: Admin & Office]
Jobs at:
ZCCM Investments Holdings
Deadline of this Job:
Tuesday, August 19 2025
Duty Station:
Zambia | Lusaka | Zambia
Summary
Date Posted: Friday, August 15 2025, Base Salary: Not Disclosed
Similar Jobs in Zambia
Learn more about ZCCM Investments Holdings
ZCCM Investments Holdings jobs in Zambia
JOB DETAILS:
JOB PURPOSE
To assist the project Manager, carry out efficient continuous material haulage and management incident free throughout the project duration.
- Operate a Tipper truck and haul tonnes of materials to the destination site.
- Conduct daily pre-start checks, basic maintenance and report any mechanical issues on the equipment.
- Inspect equipment and supplies such as: tyres, lights, brakes, gas, oil, water and all fluids. Perform pre and post trip inspections and ensure any defects are reported and repaired before use.
- Adhere to workplace health, safety, and environment (HSE) standards and report hazards or incidents immediately.
- Ensure compliance with all safety regulations and operational procedures.
- Ensure that speed limits and road signs in place are observed to reduce the risk and all reasonable measures are implemented to avoid accidents.
- Accurately record hours worked and other information into the daily work sheet.
- Keeping the truck clean and in good working order.
- Ensuring that the machinery is not overloaded and comply with the load restrictions.
- Maintain high standards of conduct and comply with all relevant rules and requirements.
- Participate in workplace skills assessment and training required.
- Give feedback on constraints to supervisor/subordinates as and when necessary.
- Carry out any other activities as assigned by the Supervisor.
- Must be willing to work in shifts, including weekends if necessary.
Job Requirements
- Grade 12 Certificate
- Machine specific training Certificate/Licence
- Valid Operating Permit
- Familiarity with mining workplace safety protocols and procedures.
- Must possess knowledge on how to do the pre- start check on the machine and able to identify defects.
- Must be conversant with controls/parts and their functions on a machine.
- Must possess knowledge about machine shut down and emergency procedures
- Minimum of 2 years relevant work experience in a mining environment, open pit will be an added advantage.
Skills and competencies
- Strong attention to detail and safety-conscious mindset.
- Good communication skills.
- Physically fit to handle the demands of the job.
- Problem-solving skills and ability to make quick decisions.
- Good team player and able to coordinate work with minimum supervision.
Working Environment
Job holder is exposed to project site working environment in remote locations. Job Holder will be stationed at the Rufunsa mining project site or any assigned site
Work Hours: 8
Experience in Months: 24
Level of Education: professional certificate
Job application procedure
Interested and qualified? Click here to apply
All Jobs | QUICK ALERT SUBSCRIPTION
